H2-ready ≠ wasserstofffähig
Summary
The fact sheet distinguishes between 'H2-ready' plants (prepared for future conversion) and 'hydrogen-capable' plants (currently operational with hydrogen). It recommends that the German government only fund projects certified as 100% H2-ready, with conversion costs integrated into tender prices to allow fair comparison with other greenhouse gas-neutral technologies.
Key insights
- There is a fundamental technical and climate-policy difference between 'H2-ready' and 'hydrogen-capable' plants, though the terms are often used synonymously. 'H2-ready' means a plant is designed for natural gas but prepared for later conversion, meaning hydrogen operation is not currently possible. 'Hydrogen-capable' means the plant can demonstrably operate with hydrogen in its existing technical state.
- To ensure cost-efficiency and minimize emissions, the German government should exclusively fund power plant projects certified as 100% H2-ready. This requires that the costs of future conversion to hydrogen be bindingly considered during the tender phase to enable direct cost comparisons between power plants, storage, and flexibility options.
- The document proposes specific definitions for certification: a plant is 'xx % hydrogen-capable' if it can use that volume of hydrogen in its current state without significant efficiency losses or increased NOx emissions. A plant is 'xx % H2-ready' if it can be made hydrogen-capable through a defined list of measures, provided conversion costs remain below a technology-specific percentage threshold.
- Hydrogen's physical properties necessitate significant technical modifications compared to natural gas. These include larger pipe diameters due to lower volumetric energy density, adjustments to combustion chambers due to higher flame speeds, and enhanced sealing and material requirements to prevent leakage and material embrittlement.
- Different power plant technologies offer varying levels of hydrogen readiness. Gas engine plants are highly flexible and some small 100% hydrogen-capable plants are commercially available. Open-cycle gas turbines (OCGT) are suitable for peak loads, with 100% hydrogen-capable large turbines expected by 2030. Combined cycle gas turbines (CCGT) have higher efficiency but longer start times. Fuel cell plants are intrinsically 100% hydrogen-capable but currently limited to smaller scales.
Cite the original document
- APA
- Schreck, D. S. (2026). H2-ready ≠ wasserstofffähig. Germanwatch. https://www.germanwatch.org/sites/default/files/2026-03/Germanwatch_Factsheet_H2-ready_ist_nicht_gleich_wasserstofffaehig.pdf
- Chicago
- Schreck, Dr. Simon. H2-ready ≠ wasserstofffähig. Germanwatch, 2026. https://www.germanwatch.org/sites/default/files/2026-03/Germanwatch_Factsheet_H2-ready_ist_nicht_gleich_wasserstofffaehig.pdf.
- Wikipedia
- {{cite report |last1=Schreck |first1=Dr. Simon |title=H2-ready ≠ wasserstofffähig |publisher=Germanwatch |date=March 2026 |url=https://www.germanwatch.org/sites/default/files/2026-03/Germanwatch_Factsheet_H2-ready_ist_nicht_gleich_wasserstofffaehig.pdf |access-date=5 November 2026 |via=Climate Insights Directory (document gerwat-001700)}}
- BibTeX
- @techreport{schreck2026h2ready, author = {Schreck, Dr. Simon}, title = {{H2-ready ≠ wasserstofffähig}}, institution = {Germanwatch}, year = {2026}, month = mar, url = {https://www.germanwatch.org/sites/default/files/2026-03/Germanwatch_Factsheet_H2-ready_ist_nicht_gleich_wasserstofffaehig.pdf}, urldate = {2026-11-05}, note = {Indexed by Climate Insights Directory, document gerwat-001700} }
Full text
Collected · Record updated