Thermal energy storage in Scotland
Summary
The report concludes that thermal energy storage can act as a critical 'warehouse' to balance variable renewable energy supply and decarbonised heat demand in Scotland, though many high-performance technologies remain in early development stages.
Key insights
- Thermal energy storage (TES) can mitigate the costs of increasing energy system flexibility in Scotland by reducing the need for new transmission lines to the UK or Europe, avoiding inefficient gas power plant operation, and reducing reliance on consumer response measures.
- There is a significant risk that the energy system may adopt short-term, low-cost fixes instead of superior long-term solutions like TES, which may require higher initial investment.
- Seasonal thermal storage is identified as a priority for testing to meet winter heating demand using energy stored in summer, which could offset the need for massive investment in fossil-fuel generation capacity required if winter heat were met solely by electricity.
- The report identifies four primary use-cases for TES: storing electricity thermally for heat, storing electricity thermally for electricity, storing thermal energy thermally for heat, and storing thermal energy thermally for electricity.
- Sensible heat storage materials are the most cost-effective (below ~£5/kWh) and well-developed, while phase-change materials (PCMs) offer higher energy density (below ~£50/kWh), and thermo-chemical materials (TCMs) provide the highest density but are the most expensive (exceeding ~£100/kWh).
- Cryogenic energy storage (CES), also known as liquid air energy storage (LAES), is in the pre-commercial stage with the UK leading in innovation; it can achieve over 80% efficiency if waste heat from industrial processes or power plants is used to warm the cryogen.
- Pumped Thermal Electricity Storage (PTES) is currently at the validation stage, with UK-based company Isentropic aiming for a round-trip efficiency of 72% and a levelised cost of storage of $35/MWh.
- A major barrier to TES deployment is the current market framework, which does not reflect the true value of energy storage and allows established thermal generation to crowd out storage options, potentially locking in future emissions.
- In Scotland, a high proportion of households with electric heating are in fuel poverty (56% compared to 35% for gas), and many use inadequate storage heaters under Economy 7 tariffs, presenting an opportunity for improved TES technology.
- The report suggests that the trend of replacing hot water tanks with combi-boilers is a threat to distributed storage; it argues for incentivising the retention of existing tanks or developing high-energy-density PCMs to reclaim that storage capacity.
Cite the original document
- APA
- Radcliffe, J., & Li, Y. (2015). Thermal energy storage in Scotland. ClimateXChange. https://www.climatexchange.org.uk/wp-content/uploads/2023/09/thermal_energy_storage_in_scotland.pdf
- Chicago
- Radcliffe, Jonathan, and Yongliang Li. Thermal energy storage in Scotland. ClimateXChange, 2015. https://www.climatexchange.org.uk/wp-content/uploads/2023/09/thermal_energy_storage_in_scotland.pdf.
- Wikipedia
- {{cite report |last1=Radcliffe |first1=Jonathan |last2=Li |first2=Yongliang |title=Thermal energy storage in Scotland |publisher=ClimateXChange |date=July 2015 |url=https://www.climatexchange.org.uk/wp-content/uploads/2023/09/thermal_energy_storage_in_scotland.pdf |access-date=5 November 2026 |via=Climate Insights Directory (document climex-000599)}}
- BibTeX
- @techreport{radcliffe2015thermal, author = {Radcliffe, Jonathan and Li, Yongliang}, title = {{Thermal energy storage in Scotland}}, institution = {ClimateXChange}, year = {2015}, month = jul, url = {https://www.climatexchange.org.uk/wp-content/uploads/2023/09/thermal_energy_storage_in_scotland.pdf}, urldate = {2026-11-05}, note = {Indexed by Climate Insights Directory, document climex-000599} }
Full text
Collected · Record updated